Please note! This is a complicated product with many options. If you are unsure of what to select, please contact us on the phone or via email to discuss your needs.
This is the best value Performance Power Package on the market for Lexus GSF! It combines the famous RR Racing Bazooka Exhaust with RR Racing PPE Racing Headers with optional RR Racing tune for optimum normally aspirated power. The power gain with the tune is expected to be between 40 and over 50whp (depending on options, fuel, etc.) as shown in the dyno chart below.
RR Racing Tune Options for Lexus GSF/RCF
Tuning is critical to optimize power gains with headers and exhaust. We offer various tuning options with this package (see options for this product) as follows:
- Remote Tuning. Choose an ECU tune option for any of the listed RCF Model Years and you will receive a tuning kit for remote tuning. This will be a fairly simple procedure of reading your ECU file and then writing the new tuned version using the tuning kit.
The RR Racing Valvetronic Bazooka Exhaust:
This product is a full cat-back system, but it is also available in as an axle back bolt-on to Borla exhaust system for the RC F.
In “Bazooka” mode, our RCF Valvetronic Exhaust is race-car loud, bringing out the full sonorous glory of the RCF v8. The sound is absolutely addictive, much like the popular Borla exhaust, only louder. But as amazing as that sound is, we fully realize that there are times where a more civilized exhaust note is required, so we implemented 2 electronic valves that route the exhaust gases through secondary mufflers. With a push of a button on the remote control key fob, your RCF will go from race car loud to quiet and drone-free in just a few seconds.
Our Valvetronic Bazooka features high quality stainless steel construction with 2.5” diameter T304 stainless steel piping, X-pipe for better exhaust scavenging and maximum hp gains, and is 100% made in the USA. Our standard quad tips are 3.5” diameter carbon fiber, and are removable/replaceable in case of damage.
Power gains are the similar compared to most 2.5” dual cat-less RCF exhausts, or about 25hp measured at the wheels. Additional gains are attainable when pairing this exhaust with PPE headers and our ECU tune, or even our 670hp Supercharger kit!
For a more recent RCF dyno testing results, please refer to the following News Article:
http://blog.rr-racing.com/news/2022/01/13/dyno-testing-the-latest-mods-on-lexus-rcf/
Please watch the following video comparing our Borla options:
The following video compares loud and quiet modes on Lexus GSF (similar sound on Lexus RCF):
PPE Racing Headers:
The PPE RCF/GSF Headers make a significant increase in flow compared to the stock manifolds. Tube lengths and diameters are increased coming together into a ported 4-1 parallel merge collector. Completely TIG welded construction with thick 16-gauge tubing for long lasting power gains.
We do not offer the PPE Equal Length headers for this package, as they do not add more power and the sound differences are minor with our exhaust system. However, if you are interested in PPE Equal Length headers, please contact us for package pricing. Please note that the headers do not come with manifold gaskets. For older cars replacing manifold gaskets may be necessary. We offer these as one of the options with this product.
These headers do not require a re-location bracket.
Header Features:
- Comes with optional RR Racing ECU Upgrade Tune package for increase power gain
- 3/8" thick head and outlet flanges
- Mandrel bent Stainless Steel 16 gauge tubing
- 15 degree parallel merge collectors
- Runners are welded with Silicabronze at the head flange
- Porting at flanges
- Flat sanded head flanges
- Includes factory style outlet gaskets and optional engine gaskets
- Install instructions
- 1yr warranty
- RR-Racing recommends either doing ceramic coating or using 2" wide titanium heat insulation with these headers. We also recommend keeping the heat shield to insulate the starter when the headers are installed.
Important Disclaimer
Headers that are not equipped with factory catalysts and are for racing vehicles only (for vehicles not registered to be driven on the road). RR-Racing cannot ensure the applicability of manufacturer's or third-party warranties after performing this modification. Likewise, RR-Racing does not provide any warranty, written or implied, to the engine or drivetrain of your vehicle. By buying this product, you agree to the terms of this disclaimer.